User Manual BDL4675XU
1.4.
PORTRAIT MOUNTING
Wall mounting holes
Notes:
• Metric 6 (10mm) screws (with a length 10-15mm longer
than the thickness of the mounting bracket) are needed for
wall mounting (not included). Tighten the screws securely
(recommended torque: 470 - 635N•cm)
• The mounting interface should comply with the UL1678
standard in North America. The mounting means must be
strong enough to bear the weight of the monitor (approx.
27.5kg).
Allowable tilting angle in Portrait Mode
Note: The AC IN/OUT socket should be on top of all
connectors when rotating your monitor.
Note: When installing the monitor on the wall, please consult a
professional technician for proper installation. The manufacturer accepts
no liability for installations not performed by a professional technician.
RETURN TO THE CONTENTS