Table of Contents
Advertisement
In DAB+ mode, press and hold SCAN for 3
seconds.
» The clock radio stores all the available
DAB+ radio stations automatically.
» After full scan, the first available station is
broadcast.
Store DAB+ radio stations
manually
You can store up to 10 DAB+ radio stations.
1
Tune to a DAB+ radio station.
2
Press and hold PRESET for 3 seconds to
activate the storing mode.
3
Press TUNING
» The preset number is displayed for
one second. Then if this position is
occupied, the previously stored DAB+
station name will be displayed; if this
position is empty, [Empty] will be
displayed.
4
Press PRESET to confirm.
5
Repeat steps 1-4 to store other DAB+
stations.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Listen to a preset DAB+
radio station
In DAB+ mode, press PRESET repeatedly to
select a preset radio station.
/
to select a number.
Use DAB+ menu
1
In DAB+ mode, press and hold MENU for
3 seconds to access DAB+ menu.
2
Press TUNING
menu options:
[STATION]: Display a list of available
•
DAB+ stations.
[FULL SCAN]: Scan and store all
•
available DAB+ radio stations.
[MANUAL]: Tune to a specific channel/
•
frequency manually and add it to the
station list.
[DRC] (Dynamic Range Control): Add
•
or remove a degree of compensation
for differences in the dynamic range
among DAB+ stations. You may
experiment the options on different
source materials to decide which
option suits best.
[PRUNE]: Remove invalid stations from
•
the station list.
•
[SYSTEM]: Adjust system settings (see
the Chapter "Use system menu").
3
To select an option, press SELECT.
4
Repeat steps 2-3 if sub-option is available
under one option.
[DRC]
[DRC OFF]: No compensation applied.
•
[DRC HIGH]: Maximum compensation
•
applied (the default option recommended
for noisy environment).
[DRC LOW]: Medium compensation
•
applied.
[PRUNE]
[PRUNE N]: Return to the previous menu.
•
[PRUNE Y]: Remove invalid stations from
•
the station list.
/
to scroll through the
EN
6
Advertisement
Table of Contents
