4
Listen to FM radio
Note
•
Keep the clock radio away from other electronic
devices to avoid radio interference.
•
For better reception, fully extend and adjust the
position of the FM antenna.
Tune to FM radio stations
1
Press
to turn on the clock radio.
2
SOURCE
Press
repeatedly to select FM radio.
[FM]
will be displayed for 2 seconds and
an FM icon will be turned on.
The unit will tune to the last tuned station.
3
Press and hold
seconds.
The clock radio tunes to a station with
strong reception automatically.
4
Repeat Step 3 to tune to more radio stations.
To tune to a station manually:
In FM tuner mode, press
select a frequency.
Store FM radio stations
automatically
In FM tuner mode, press and hold
more than 2 seconds.
The unit stores all the available FM radio
stations automatically and broadcasts the
rst station.
Note
•
You can store a maximum of 20 FM radio stations.
for more than 2
TUN
repeatedly to
TUN
SCAN
for
Store FM radio stations
manually
1
In FM tuner mode,tune to an FM radio station.
2
PRESET
Press and hold
seconds to activate programming mode.
The preset number begins to blink.
3
Press
repeatedly to select a number.
TUN
4
PRESET
Press
again to con rm.
5
Repeat steps 1 to 4 to store more FM radio
stations.
Tip
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio
station
Option A:
In FM tuner mode, press
select a preset number.
Option B:
1
In FM tuner mode, press
2
Press
to select a preset radio station.
TUN
Show RDS information
RDS (Radio Data System) is a service that
allows FM radio stations to show additional
information.
While listening, press
to scroll through the following information (if
available):
•
Station frequency
•
Station name
•
Program name
for more than 2
PRESET
repeatedly to
PRESET
.
INFO
repeatedly
EN
5