3 Get started
Always follow the instructions in this chapter in
sequence.
Prepare FM/DAB+ antenna
For better reception, fully extend and adjust the
position of the FM/DAB+ antenna. (Fig.
b
Note
•
To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the clock radio.
•
Risk of electric shock! Hold the plug securely when
unplugging the adapter.
Note
•
The type plate is located on the bottom of the clock
radio.
(Fig.
)
Turn on
Press POWER.
» The clock radio switches to the last
selected source.
Switch to standby mode
Press and hold POWER for 3 seconds.
» The clock (if set) appears on the display
panel.
Set time
1
In standby mode, press and hold INFO
for 3 seconds to activate the time setting
mode. (Fig.
» The hour digits blink.
2
Press
3
Press INFO to confirm.
» The minute digits blink.
4
Repeat steps 2-3 to set the minute.
5
Repeat steps 2-3 to set the day, month,
and year.
)
c
)
/
to adjust the hour.
EN
4