Setting The Alarm Clock; Phone Settings - Siemens Gigaset AL180 User Giude

Listening in to an external call
You are conducting an external call. An internal
participant can listen in on this call and take part in
the conversation (conference).
Precondition: The
Listening in
activated.
Activating/deactivating listening in
¢ ¢
MENU Settings OK
¢ ¢
Listening in OK (
Internal listening in (conference)
You want to listen in to an existing external call.
Briefly press and hold the
to the call. All participants hear a signal tone.
To end: press the end call key
hear a signal tone.
If the first internal participant presses the end call
a
key , the handset that has "listened in" remains
connected to the external participant.

Setting the alarm clock

Activating/deactivating the alarm clock
¢ ¢
MENU Alarm Clock
¢
‰
OK ( = on)
When activated:
¢
Set the wake-up time
When the alarm clock rings, press any key to switch
it off for 24 hours. If the alarm clock is set, the
9
wake-up icon will appear on the screen and the
wake-up time will be displayed instead of the date.
Setting the wake-up time
¢ ¢
MENU Alarm Clock
Enter the wake-up time in hours and minutes, then
press .
OK

Phone settings

For details on how to make audio settings, see
¢
Menu tree p. 15.
For details on how to set the system PIN on the
base station, see the Menu tree
Changing the display language
¢ ¢
MENU Settings OK
¢ ¢ ¢
Language OK
The current language is indicated by
If you accidentally choose a language you do not
understand:
¢
4 2 1 (press the keys one after the other)
MENU
Select the correct language with
function must be
¢ ¢
Base OK
‰
= on)
c
key. You can listen in
a
. All participants
¢
OK Activation
¢
OK
¢ ¢
OK Wake-up time
¢
p. 16.
¢ ¢
Handset OK
¢
select the language
‰
.
u
and press
11
Resetting the handset
You can reset individual settings and changes that
you have made. Entries in the directory, the calls
list and the handset's registration to the base sta-
tion will be retained.
¢
MENU Settings
¢
Reset Handset
Cancel the reset with
Restoring the base station to the factory
settings
When restoring factory settings:
◆
All handsets are de-registered
◆
Individual settings are reset
◆ All lists are deleted
◆
The system PIN is reset to the original code
0000
Only the date and time are retained.
Software reset
¢
MENU Settings
¢
Base Reset
Hardware reset
Disconnect the power cord from the base station.
Hold down the registration/paging key (
on the base station while reconnecting the power
cable to the base station. Release the key after
approximately 5 seconds.
Repeater mode
With a repeater you can increase the range of your
base station. You will need to activate repeater
¢
mode ( p. 16). Repeater mode and Eco mode or
Eco mode+ (
OK
Operating the base station on the
PABX
The following settings are only necessary when
your PABX requires them, see the user guide for
your PABX.
When entering the digits, enter them slowly one
after the other.
Changing the dialling mode
¢
4 I O 1 1
MENU
ling mode flashes: 0 = touch tone dialling (DTMF);
OK
1 = dial pulsing (DP)
.
OK
¢ ¢
OK Handset
¢
OK
a
.
¢ ¢ ¢
OK Base
¢
OK
¢
p. 1) cancel each other out.
¢
The number for the set dial-
¢
enter number
¢
OK
OK
¢
p. 1)
¢
.
OK