Table of Contents
Advertisement
•
•
Bearer
Allows you to select the type of network used when launching a connection to
the e-mail server. Press
Bearer
•
•
•
E-mail server
The menus described in this section feature settings needed to connect to the
e-mail server of your Internet Service Provider (ISP) via your mobile phone. All
E-mail server
information is available to you from your service provider.
POP3 address
Allows you to enter the IP or DSN address of the POP3 server, which is used
to receive e-mails. Select
press
L
Error messages during connections are mainly due to incorrect parameters:
you should contact your operator before first use, in order to have the
appropriate GPRS parameters.
Login
Allows you to enter the login needed for connection to the network.
Select
Login
and press
Password
Allows you to enter the password needed for connection to the network.
Select
Password
and press
<
GSM
Your mobile will only use the GSM network for e-mail connections.
,
Press
to confirm your choice.
GPRS
Your mobile will only use the GPRS network for e-mail connections.
,
Press
to confirm your choice.
GPRS first
Your mobile will first try to connect to the GPRS network, then to the
GSM network if the GPRS network isn't available when launching an
e-mail connection. Press
,
.
,
, enter the login and press
,
, enter the password and press
>
or
to select:
,
to confirm your choice.
POP3 address
and press
,
.
,
,
, enter the address and
E-mail
.
59
Advertisement
Table of Contents
