Charge The Battery - Philips FISIO 620 User Manual

Philips
Hide thumbs Also See for FISIO 620:
Table of Contents

Advertisement

7
Put the back cover back on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).

Charge the battery

Your phone is powered by a rechargeable battery. A new battery is partially
charged and an alarm will warn you when the battery reaches low.
L
1
2
Getting
8
started
We recommend that you do not remove the battery when the phone is switched
on: you may lose all your personal settings (see information on battery safety,
page 78).
Once the battery and battery cover are clipped on the phone, plug the
charger (supplied with the phone, in the box) into the right hand socket
at the base of the phone as shown below.
Plug the transformer unit into a main AC power socket with easy access.
b
The
symbol indicates the state of charge:
During charging the 4 charge indicators change; Each bar represents
around 25% of charge.
When all 4 bars are steady the battery is fully charged and
you can disconnect the charger.
When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Depending on the network and condition of use, talk time goes from
2.30 to 4.30 hours and standby time from 1 to 2 weeks.

Advertisement

Table of Contents
loading

Table of Contents