Makita TW1000 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. TW1000
  6. Instruction manual

Makita TW1000 Instruction Manual

Hide thumbs Also See for TW1000:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Impact Wrench
MODEL TW1000
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
006015

Advertisement

Table of Contents
loading

Related Manuals for Makita TW1000

Summary of Contents for Makita TW1000

  • Page 1 Impact Wrench MODEL TW1000 006015 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    The tool is intended for fastening bolts and nuts. Responsible manufacturer: Power supply Makita Corporation Anjo Aichi Japan The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They...

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-2 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 4 19. Store idle power tools out of the reach of chil- 22. Use the power tool, accessories and tool bits dren and do not allow persons unfamiliar with etc. in accordance with these instructions and in the power tool or these instructions to operate the manner intended for the particular type of the power tool.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 005970 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...

  • Page 6: Operation

    For socket with O-ring and pin Move the O-ring out of the groove in the socket and remove the pin from the 005972 socket. Fit the socket onto the anvil of the tool so that the hole in the socket is aligned with the hole in the anvil.

  • Page 7: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 8 Makita Corporation Anjo, Aichi, Japan 884595B225...

Table of Contents