Power Supply - Pentax PLP-701 Instruction Manual

(4) Switching the rotation speed
• Please switch the rotation speed after turning off the instrument

power supply.

[From 300 to 600 rpm]
Manual mode display lamp
Off level display lamp
MANUAL AL MAN
BATTE TERY Y
MODE MODE
Auto/manual change key
MAN MANUAL AL
BATTE TERY Y
MODE MODE
Battery check
Power
supply key
NOTE:
• When the instrument is set to 600 rpm, the Manual mode display lamp
and off level display lamp blink in red for a few seconds after power
supply is turned on.
• Rotation speed is set to 300 rpm on factory shipping.
20
OFF OFF
LEVEL VEL
POWER WER
CHECK CHECK
ON ON
OFF OFF
OFF OFF
LEVEL VEL
POWER WER
CHECK CHECK
ON ON
OFF OFF
Push the power supply key while
1
pushing the Auto/Manual change
key.
Manual mode display lamp and off
2
level display lamp blink in red a
few seconds and tell that the
rotation is switched to 600 rpm.
The switched rotation speeds is
3
memorized even if power supply is
turned off.
Turn off the power supply and
4
then push the power supply key
while pressing the battery check
key to return to 300 rpm.