Power Supply - Pentax PLP-601 Instruction Manual

(4) Switching the rotation speed
• Please switch the rotation speed after turning off the instrument

power supply.

[From 300 to 600 rpm]
Manual mode display lamp
Off level display lamp
MANUAL AL MANU BATTER
MODE MODE
Auto/manual change key
MANU MANUAL AL BATTER
MODE MODE
Battery check
Power
supply key
NOTE:
• When the instrument is set to 600 rpm, the Manual mode display lamp
and off level display lamp blink in red for a few seconds after power
supply is turned on.
• Rotation speed is set to 300 rpm on factory shipping.
20
OFF OFF
LE LEVEL VEL
TERY Y
CHECK CHECK POWER PO WER
ON ON
OFF OFF
OFF OFF
LE LEVEL VEL
TERY Y
CHECK CHECK PO POWER WER
ON ON
OFF OFF
Push the power supply key while
1
pushing the Auto/Manual change
key.
Manual mode display lamp and off
2
level display lamp blink in red a
few seconds and tell that the
rotation is switched to 600 rpm.
The switched rotation speeds is
3
memorized even if power supply is
turned off.
Turn off the power supply and
4
then push the power supply key
while pressing the battery check
key to return to 300 rpm.