Table of Contents
Advertisement
Calls are considered incomplete if there is no answer or if the line is busy. The
Incomplete Call Handling Status has 6 options: (1) record a message from the
caller; (2) transfer the caller to a covering extension; (3) page the mailbox owner
by intercom (Intercom Paging); (4) notify the mailbox owner via a beeper (pager);
(5) transfer the caller to the operator; or (6) let the caller try another extension.
Subscriber's
Main Menu
Log into your mailbox.
To set Leaving a Message Status
1
To set Covering Extension Transfer Status
2
To set Intercom Paging Status
3
4
To set Beeper (Pager) Access Status
5
To set Operator Transfer Status
6
To set Returning to Top Menu
Automated Attendant Service Status
Follow the prompts according to your needs.
!!
!!
• The Intercom Paging feature is available only if you are using a
Panasonic KX-TA series or KX-TD series telephone system.
This feature is used to direct callers to either your regular or interview mailbox.
This mode is effective only for Incomplete Call Handling Service (when the
subscriber's line is busy, or he cannot take the call, or when he has enabled Call
Blocking).
Subscriber's
Main Menu
Log into your mailbox.
!!
!!
• Not all subscribers have an interview mailbox. The System
Administrator or the System Manager must assign an interview
mailbox.
Incomplete Call Handling Status
4
Press 4.
Press 4.
Message Reception Mode
4
3
Press 4.
Press 3.
4
To Change
1
To Accept
2
Make your selection.
1
Press 1 to change.
(Interview Mode/Message
Recording Mode)
Section 4 Special Features
4.3
On-hook.
4.4
On-hook.
21
Advertisement
Table of Contents
