Download Print this page

Moulinex Bebeo User Manual page 6

Steamer blender

Advertisement

BeFore you use your appliance For the First time
Before you use your appliance for the first
time, we advise you to carry out a steaming
cycle using 4 measures of water.
Then wash the bowl, basket, lid, blade and
accessories in dishwater. Clean the body of
the appliance with a soft cloth.
use
P
ositioning the lid
To lock the lid, position it on the bowl with
the
marks lined up then turn it
anticlockwise - fig. 2/3.
Note: the lid cannot be removed once
the bowl is locked onto the body of the
appliance.
P
ositioning the bowl
Once the lid is locked on, place the bowl
on the body of the appliance and turn it
until it locks into position - fig. 4/5.
Note: the appliance will not work if the
bowl is not properly locked in position.
U
sing the steaming function
Open the plug on the water tank and
pour in the amount of water indicated for
cooking the food using the water measure
- fig. 6. Put the plug back in. Place the food
in the steaming basket then place the
basket in the bowl, in the notch designed
for this purpose - fig. 7. Close the lid,
making sure it is locked in position
- fig. 2/3. Then place the bowl on the body
of the appliance - fig. 4/5 and turn the
button to the steaming position
10
To remove the blade, turn the knob - fig. 1
until the upper and lower parts of the blade
are free.
The indicator light comes on and the
button returns to the
The appliance starts to heat up and stops
automatically when the water tank is empty.
Caution: on first use, the steam function
may already be selected. Thus, the tank
must always be filled before you plug in the
appliance.
S
teaming
Cooking time varies according to the
temperature of the food and evaporation
of the water poured into the tank before
start-up. The cooking times in the guide
opposite are given as an indication only for
approximately 100 g of food, either fresh or
frozen, cut up into small cubes or pieces.
Note: if the food is not cooked enough, wait
10 minutes before opening the plug on the
tank. fill it up again and do another cycle,
adjusting the amount of water.
.
position.

Advertisement

loading