Table of Contents
Advertisement
Recording with VIDEO Plus+
Video Plus+
8 3 5 4 2 - - - -
0 - 9
:enter
: access
ENTER
: correct
: exit
EXIT
Timer recording
Pos
Date
Start Stop
1 BBC1 31/12 10:30 11:30 SP ON
1 BBC1 31/12 11:30 12:30 SP ON
2 BBC2 31/12 12:30 13:30 SP OFF
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - -
- - - - - - - -/ - - - -: - - - -: - -
VIDEO Plus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation. The VIDEO Plus+ system is
manufactured under license from Gemstar
Development Corporation.
24
Programming recordings with the VIDEO Plus+ function
The VIDEO Plus+ code simplifies entering programme information to record TV
and SAT programmes. The recording time may be slightly longer than the TV
programme.
VIDEO Plus+
Press VIDEO Plus+.
Enter the VIDEO Plus+ number ( to correct entry).
Confirm entry with ENTER. The Timer recording screen appears.
If you do not wish to edit the Timer recording data activate timer mode
Press TIMER to activate the timer mode. The
To edit Timer recording data press ENTER.
Select station
1/3
Use
PDC
Use
Use
Set the tape speed: A (Automatic), SP, LP, EP
(for automatic setting and PDC recording see page 22)
- - - -
TIMER
Press ENTER to confirm the settings.
- - - -
Press TIMER to activate the timer mode.
Ensure that the video recorder symbol
To cancel the Timer recording Standby Mode see page 21.
If the device fails to recognise the TV station automatically, the [ - - ] indication
appears under the programme position (Pos).
The [ - - ] will also appear, when using VIDEO Plus+ to record from a Satellite
broadcast for the first time. For each satellite station, you will have to set the
Pos for the first time (for details see page 25).
The TV station must be entered manually with
The VCR will store this information so it will not have to be entered again.
and use
to set date.
to set the date, week or day of week and use
to change the start time and use
to change the stop time and use
symbol appears on the VCR display.
to set the start time.
to set the stop time.
to set the tape speed.
use
to set PDC.
is displayed.
.
Advertisement
Table of Contents
