Table of Contents
Advertisement
Recording
Recording functions
Instant recording
Instant recording of the
VCR - TV picture.
Timer recording
Recording controlled by timer.
Recording with INTELLIGENT TIMER
Repeating programmed
recordings.
Recording with Video Plus+
Programming recordings using
the Video Plus+ function.
Recording with external recording controls
Recording is controlled
by an external device.
20
Instant recording
Set the TV set to the video channel and insert a cassette into the
VCR; make sure that the cassette's protection tab is intact.
Select channel to record from.
When recording from an external device, select from
REC
Scart input AV.
20
Press REC to start recording.
Press STOP
Press PAUSE/SLOW to pause recording.
To protect the video heads this function will be terminated after
approx. 5 minutes.
21
22
Press PAUSE/SLOW again to resume recording.
Tape speed
REC MODE
Prior to starting the recording session, press REC MODE to set the
23
tape speed.
SP : normal recording time
LP : double recording time
EP : triple recording time
When playing back LP or EP recordings, interferences may occur
24
25
when using certain types of cassettes (e.g. Type E-300). These are
not indicative of a VCR malfuncion.
Tape Remain counter
The display of the VCR shows:
STATUS
Time - Counter - Tape Remain.
26
Press STATUS until [RE] is displayed.
to stop recording.
- optimal picture quality
- lower picture quality
- lowest picture quality
Advertisement
Table of Contents
