Panasonic TH-85PF12E Operating Instructions Manual page 36

Screensaver (For preventing image retention)
Setup of Screensaver Time
After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available
for selection and the Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off".)
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "Screensaver duration" of the "Standby after SCR Saver" can be set from 0:00
to 23:59. When this is set to "0:00", " Standby after SCR Saver" will not be
activated.
Note: Timer function will not work unless "PRESENT TIME" is set.
36
Press to select Start Time / Finish Time
(when Time Designation is selected).
Press to select Periodic Time / Operating Time
(when Interval is selected).
Press to select Screensaver duration
(when Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Screensaver
PRESENT TIME 15:00
Start
Scrolling bar only
Function
Time Designation
Mode
6:15
Start Time
Finish Time 12:30
Screensaver
PRESENT TIME 15:00
Start
Scrolling bar only
Function
Interval
Mode
Periodic Time 12:00
3:00
Operating Time
Screensaver
PRESENT TIME 15:00
Start
Scrolling bar only
Function
Standby after SCR Saver
Mode
6:15
Screensaver duration