Table of Contents
Advertisement
Watching Videos and DVDs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 10 and p. 11)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Turn the TV on
1
■
When connecting with SCART as example 2 or 3 (p. 10 and p. 11)
Receives input signals automatically when playback starts
•
Input signals are automatically identifi ed by the SCART (pin 8)
terminal.
•
This function is also available for HDMI connections (p. 33).
■
If input mode is not switched automatically
Perform
•
Dependant on the setup of the equipment
2
Display the Input select menu
INPUT
ASPECT
EXIT
Select the input mode connected to the equipment
3
OK
MENU
RETURN
Input Selection
AV1
AV2/AV2S
OPTION
DIRECT TV REC
COMPONENT
HDMI
TV
1
2
3
•
You can also select the input using the AV button on the remote
4
5
6
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
7
8
9
•
You can label or skip each input modes
0
VCR
4
View
TEXT
F.P.
INDEX HOLD
Displays the selected mode
REC
VCR
DVD
PROGRAMME
TV
■
To return to TV
Note
•
If the external equipment has an aspect adjustment function, set to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
16
and
watch
select
"Input Labels" (p. 28)
Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR / DVD switch
VCR
DVD
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
PROGRAMME
Select programme
Record
REC
Start recording
∗
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold
during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
"VCR" position
"DVD" position
Equipment
Code
Equipment
VCR
10 (default)
DVD
DVD
11
Player home theatre
Note
•
Confi rm correct operation after the code changed.
•
The codes will be reset to default values if batteries are replaced.
•
"DVD" means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗
VCR
DVD
1
2
3
Press
4
5
6
7
8
9
0
VCR
Code
70 (default)
71
17
Advertisement
Table of Contents
