Accessories / Options; Using The Clamper; Installing Remote’s Batteries - Panasonic Viera TH-37PV7EY Operating Instructions Manual

Accessories / Options

Standard accessories
Check that you have the accessories and items shown
Remote Control Batteries for the
Transmitter Remote Control
OK
•
EUR7651120 Transmitter
•
1 2 3
4 5 6
7 8 9 R6 (UM3)
0
TV
Operating Instructions
Pan European Guarantee Card
Optional accessories
Wall-hanging bracket
(vertical)
TY-WK42PV3W
Caution
•
In order to maintain the unit's performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Installing remote's batteries
1
Pull
open
Hook
2
Close
+
-
+
-
Note the correct
polarity (+ or -)
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
6
Clamper Mains Lead
(2)
(2)
Pedestal (ST-42H2-WK)
•
TBLX0024
For installation p. 7 and p. 8
(angle)
TY-WK42PR2W
TY-WK42PR3W

Using the clamper

Rear of the TV
•
Do not bundle the RF cable
and mains lead together (could
cause distorted image).
•
Fix cables with clampers as
necessary.
•
When using the optional
accessory, follow the option's
assembly manual to fi x cables.
1. Attach the clamper
To remove from the TV:
hole
Insert the clamper Keep pushing
both side snaps
in a hole
2. Bundle the cables
To loosen:
Set the tip
knob
in the hooks
hooks
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If suffi cient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
M5 × 20
■
Assembling the pedestal
Installing the poles
For TH-42PV7EY
(Outside)
D
Insert the poles into the left and right holes in the
underside of the base so that they fi t securely as
shown in the illustration above.
■
Securing the TV
snaps
B
Keep pushing
the knob
Assembly screw (4) Pole (2)
M5 × 30
Securing the poles
Front
C
C
For TH-37PV7EY
(Inside)
Use the assembly screws
fi rmly to the bottom of the base.
•
Forcing the assembly screws the wrong way will
strip the threads.
View from the bottom
Hole for pedestal
installation
Arrow mark
D
Label
Base
D
A
to secure the poles
A
Carry out work on a horizontal and
level surface.
Use the assembly screws to
fasten securely.
7