Troubleshooting
First, try out the following procedures (P162–175).
If the problem is not resolved, it may be improved by selecting [Reset]
[Setup] menu.
Battery and power source
The charging lamp has gone off but the unit has not been charged.
•
This phenomenon occurs when charging in a location where the temperature is very high or very
low.
> Reconnect the USB connection cable (supplied/optional) in a location where the ambient
temperature (and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF) range, and try
charging again. [If you reconnect the USB connection cable (supplied/optional) when the unit is
fully charged, the charging lamp will turn on for approximately 15 seconds.]
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
•
The battery is exhausted. Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Auto Power Off].
Card/battery door does not close.
•
Insert the battery securely all the way in.
The battery becomes flat too quickly.
•
Is a Wi-Fi connection being used for a long period of time? The battery can become flat quickly when
connected to Wi-Fi.
> Turn the camera off frequently by using the [Auto Power Off] etc.
Others
(P11)
- 162 -
(P48)
on the
(P47)
(P47)