To print pictures wirelessly
•
The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet.
Follow the on-screen instruction to configure.
•
See the following website for information on the PictBridge (wireless LAN-compatible)
printer.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
Select [Wireless Print] in the [Wi-Fi] menu.
•
If you have already set the connection destination, the confirmation screen is displayed. Select [Yes].
•
Press [
] to quit [Wireless Print].
To print a single picture
∫
Refer to "Selecting a single picture and printing it" on
To print multiple pictures
∫
Refer to "Selecting multiple pictures and printing them" on
To change the connection destination
∫
1
Press [DISP.] on the destination confirmation screen.
2
Press 3/4 to select the item, and press [MENU/SET].
To change the wireless access point
∫
1
Press [DISP.] on the destination confirmation screen.
2
Press 3/4 to select [Change Access Point], and press [MENU/SET].
3
Press 3/4 to select a name of registered wireless access point or [New Access
Point], and press [MENU/SET].
•
When you select [New Access Point], a new access point will be registered to this unit.
Note
•
Motion pictures cannot be printed out.
Wi-Fi
(P41)
P148
for details.
P148
- 121 -
for details.