Insert Editing - Panasonic NV-HS930 Series Operating Instructions Manual

Insert Editing

The Insert Editing function lets you substitute a part of a
previously made recording by inserting one or several new
scenes together with new sound. This editing method lets
you precisely set the end point, and the recording will stop
automatically when this point is reached. This editing method
also ensures smooth, noise-free picture transitions between
old and new recordings.
As the Insert Editing function is mostly used for replacing
relatively short parts of an already recorded programme, no
Tape Library data is registered for the newly inserted parts.
(42) (43)
EJECT
3D DNR
EXT LINK A.DUB
TBC INSERT
(44) (56)
Video movie camera
• Connect a movie camera or another VCR to this VCR as
shown in the illustration.
• Press the [INPUT SELECT] (3) to select the AV Input
(external input) [A1], [A2] or [A3] according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1) Press the [Pause/Still] (53) on this
VCR and then use the [Shuttle
Ring] (55) or [Jog Dial] (54) to
search for the tape position at
which you want the insert recording to end.
2) Press the [RESET] (19) to reset the tape counter
displayed on the VCR display to [0:00.00].
3) Use the [Shuttle Ring] (55) or [Jog Dial] (54) to search
for the tape position which you want the insert editing to
start.
4) Press the [INSERT] (48) to put this VCR in the recording
pause mode.
• The new sound will be recorded on the Hi-Fi sound
tracks.
• In case you also want to record the new sound on the
normal (mono) audio track, press the [A.DUB] (49).
The indication on the On Screen Display changes to
[AV INSERT].
5) Start playback on the source unit and search for the
beginning of the scene that you want to dub (copy) onto
this VCR.
6) When you have found that point, press the [Pause/Still]
(53) on this VCR again to start recording the new part
from the playback unit.
• When the tape counter displayed on the On Screen
Display becomes [0:00.00], recording automatically
stops, and this VCR stops in the recording pause mode.
7) Press the [Stop] (9) to finish editing.
(57)
Other VCR
Hints:
• If you want to change the audio recording level, adjust it.
(See page 14.)
• Insert editing cannot be performed on blank sections of a tape.
In such case, perform assembly editing first.
• The cassette number is not recorded for the programme which has
been recorded with Insert Editing.
25