Tape Library System - Panasonic NV-HS930 Series Operating Instructions Manual

Video cassette recorder

Table of Contents

This advanced system makes it quick and easy to check the contents of an inserted cassette. It can also be used to quickly find

out which cassette in your collection contains a desired programme.

Whenever a cassette with an intact erasure prevention tab is inserted, the VCR first performs a brief check and then shows the

number of the cassette and its contents on the On Screen Display. To start playback of the desired programme, simply select it

on the On Screen Display and press the [LIBRARY/SEARCH] (4).

To index each recorded programme for the Tape Library System, this VCR automatically registers the Library data (cassette

number, title

, name of TV station

The name of the TV station or the programme position number is entered instead.

In case of a TV station with Teletext information, the title of the TV programme is entered automatically, provided the

[Title page] is correctly set. (See page 27.)

In case of a TV station with Teletext information, the name of the TV station is registered automatically.

The VCR's clock must be set correctly.

The VCR's memory can hold a maximum of 128 programmes (or 30 tapes).

Precautions for Recording:

• We recommend that you use new tapes for recording.

• Each recorded programme should have length of at least 15 minutes in the SP or LP mode.

• Each recorded programme should have length of at least 25 minutes in the EP mode.

• No Tape Library data is registered during insert editing.

• If you copy a cassette with a cassette number, the tape library data may not be copied correctly. Therefore, the VCR's Tape

Library System may not work correctly with such a copied cassette.

• When a new recording is made over existing recordings on a tape, the original programmes may be deleted from the list.

• The VCR's power back-up system protects the Tape Library data in the memory in case of a power failure and stores it for up to

5 years when the VCR is not connected to an AC mains socket.

• When the recording is completed and you eject the cassette, the cassette number remains displayed on

the VCR display for approximately 30 seconds. Be sure to write this number on the cassette label.

• When the VCR's entire memory area has been used up by the Tape Library data, the indication

[Library memory full !] appears on the TV screen for several seconds when Tape Library screen is opened.

After this, recording is still possible but no new Tape Library data can be stored. In this case, delete the

Tape Library data that you do not need any more before making further recordings. (See page 21.)

How to Read the Tape Library Contents

Title:

In case of a TV station with Teletext information, the title

of the TV programme is entered automatically, provided

the [Title page] is correctly set.

Manually adding or editing the title is also possible.

TV Station Name:

For a TV programme that was broadcast with Teletext

information either when the broadcaster does not provide any

TV programme pages or the title page is not correctly set.

Programme Position Number:

For a TV programme that was broadcast without

Teletext information.

Direct TV Rec:

For a TV programme recorded with the Direct TV Recording function.

Notes:

• If you press the [ON] (Yellow) (10) on the Tape Library screen, the total number of titles and tapes registered in the VCR are

displayed.

• The total titles and total tapes of the VCR are automatically displayed when Tape Library screen is

opened if either the total number of titles are 120 or more (or the total number of tapes are 28 or more).