Insert Editing - Panasonic NV-HD100A Operating Instructions Manual

3
Edit in
00 INSERT
00 Edit out
1
00
Editing
Insert Editing
This is used to substitute one scene for another providing.
Preparation
• Insert a recorded cassette with an intact erasure
prevention tab.
• Select the video source required by pressing INPUT
SELECT to set A1.
Operations Display Symbols
1
PAUSE/
STILL
(;)
Press PAUSE/STILL.
4
PAUSE/
STILL
11
Start insert editing by pressing
PAUSE/STILL.
• The insert editing will finish when the counter reaches
0:00.00.
Search for the Edit out (ending) point, and
set the counter to 0:00.00 by pressing
RESET.
Search for the Edit in (starting) point, and
press INSERT.
• If you want to replace the sound too, press AUDIO DUB
as well.
RESET
7.
2
,7
REW
41/.1
Note:
Insert Editing cannot be used on blank sections of a tape. In
this case use Assembly Editing first.
The new sound will be recorded on the Hi-Fi sound track. If
AUDIO DUB selected, the new sound will also be recorded
on the normal sound track.
Only monaural sound recording is possible on the normal
sound tracks.
23
2
0.0:00.00
4
r). INSERT
00 0:00.00