Using Your Device In A Vehicle; Using The Device Holder; Connecting The Car Charger - Mio DigiWalker C710 User Manual

1.4 Using Your Device in a Vehicle

A device holder and car charger are supplied

Using the Device Holder

Use the device holder to mou
in a vehicle. Make sure that the GPS antenna
has a clear view of the sky. (See the
docum ent supplied with the device holder for
the in stallation instruction.)
NOTE:
Depending upon the specific model purchased, the device holder supplied with your
device may not look exactly the same as the picture shown.
If the car's windshield is tinted with a reflec
be needed to route the antenna to the top of the car through a window.
Con necting the Car Charger
Th car charger supplies power to your device e
car.
CAUTION: To protect your device against sudden
only after the car engine has started.
1. Connect one end of the car charger to th
power connector of your device.
2. Connect the other end to the 12-volt
cigarette light
and charge your device. The indicator
light on the car charger lights in green to
indicate that power is being supplied to
your device.
nt your device
er or power port to power
w ith your device.
tive coating, an external antenna (optional) may
when you are usin
surges in current, connect the car charger
e
g the device in a
To Cigarette Lighter
7