Using Your Device In A Vehicle; Using The Device Holder; Connecting The Car Charger - Mio DigiWalker C220 User Manual

1.3 Using Your Device in a Vehicle

Using the Device Holder

CAUTION:
Select an appropriate location for the device holder. Never place the holder where the
driver's field of vision is blocked.
If the car's windshield is tinted with a reflective coating, an external antenna (optional) may
be needed to route the antenna to the top of the car through a window. When closing the
car window, be careful not to pinch the antenna cable
Use the device holder to fix your device in a vehicle. Make sure that the GPS
antenna has a clear view of the sky.

Connecting the Car Charger

The car charger supplies power to your device when you are using the device in a
car.
CAUTION: To protect your device against sudden
surges in current, connect the car charger only after
the car engine has been started.
1. Connect one end of the car charger to the
power connector of your device.
2. Connect the other end to the cigarette lighter
in the car to power and charge your device.
The indicator on the car charger lights in
green to indicate that power is being
supplied to your device.
CAUTION: For optimal performance of the lithium battery, take note of the following:
6