Faqs - Panasonic Viera TX-26LM70L Operating Instructions Manual

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 36)
White spots or shadow
images (noise)
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
•
Is the unit in "AV mode"?
•
Is the mains lead plugged into the socket
outlet?
•
Is the TV unit turned On?
•
Check Picture menu (p. 17) and volume.
•
Check all required SCART cables and
connections are fi rmly in place.
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to fi ll
your screen. For user control please see
p. 28.
There may be red spots,
blue spots, green spots
and black spots on the
screen
•
This is a characteristic of liquid crystal
panels and is not a problem. The liquid
crystal panel is built with very high
precision technology giving you fi ne
picture details. Occasionally, a few non-
active pixels may appear on the screen as
a fi xed point of red, green, blue or black.
Please note this does not affect the
performance of your LCD.
Chaotic image, noisy
No image can be
displayed
Blurry or distorted image
(no sound or low volume)
30
Problem
S-Video / black and white picture
•
Using TV/AV button please confi rm your selection is S-Video
I.e. AV2/S-Video or AV3/S-Video (p. 14).
On Screen messages - I.e. AV1/EC1
•
You can simply clear these by pressing
Press again to redisplay.
Direct TV record / Q-Link
functions not recording
•
Please confi rm SCART cable and connection. Also please
set "AV1/AV2 out" in the Setup menu (p. 17).
The LCD panel moves slightly
when it is pushed with a fi nger
Clattered sound might be heard
•
There are some looseness around the panel to prevent the
damage to the panel.
The panel might move slightly when it is pushed with a
fi nger, and clattered sound might be heard. This is not a
malfunction.
•
Set "P-NR" in the Picture menu (to remove noise). (p. 17)
•
Check nearby electrical products
(car, motorcycle, fl uorescent lamp).
•
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 17)
•
Reset channels. (p. 21)
.
Actions