Menu List - Panasonic Viera TX-26LM70L Operating Instructions Manual

Menu list

Item
Menu
Viewing mode
Contrast, Brightness,
Colour, Sharpness
Tint
Colour balance
P-NR
3D-COMB
Bass
Treble
Balance
Headphone volume
NICAM
Mode
Ambience
HDMI1 input
VIERA Link
Q-Link
AV1 out
AV2 out
Teletext
Off timer
Volume correction
Power on preference
Programme edit
Auto setup
Manual tuning
Fine tuning
Owner ID
Shipping condition
•
In AV mode, the Sound menu and Setup menu give a reduced number of options.
Adjustments / Confi gurations (alternatives)
Selects four different screen settings (Dynamic / Normal / Cinema / Auto)
In each Viewing mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour
balance, P-NR and 3D-COMB can be adjusted and stored to suit your particular
viewing requirement (e.g., you may require different settings for viewing sports, fi lms, news etc.)
Changes to any settings in a viewing mode will affect all signal sources: RF, AV1, AV2, AV3, Component and HDMI1,2.
Changes will be stored automatically. By analysing and processing the incoming
picture, all four modes feature automatic enhancement.
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Min / Mid / Max)
•
Not valid on HDMI and HD signal
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to On to display sharper and more accurate colours (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components and HDMI
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
•
Off if reception is poor (FM monaural sound)
Sound quality can be improved when watching music scene or drama (Music / Speech)
Provides a dynamic enhancer to simulate improved spatial effects (Off / On)
Select to fi t the input signal
(Auto / Digital / Analogue) (p. 23)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
VIERA Link function (Off / On) (p. 24)
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV1 / AV2) (p. 22)
Chooses the signal to be transmitted from the TV to Q-Link (TV / AV2 / AV3 / Monitor)
•
Monitor: Image displayed on screen
•
Component and HDMI signals cannot be outputted
Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV3 / Monitor)
•
Monitor: Image displayed on screen
•
Component and HDMI signals cannot be outputted
Teletext display mode (FASTEXT / List) (p. 12)
Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Adjusts volume for AV and HDMI mode
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART terminal, e.g. satellite receiver
(TV / AV)
•
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur
Edits channels (p. 19)
Sets channels automatically (p. 19)
Sets channels manually (p. 19)
Fine tuning of channels (during rain, etc.)
Inputs the owner ID (p. 21)
Resets all settings, for example, when moving (p. 20)
17