Miele G 663 Plus Operating Instructions Manual page 38

Frequently asked questions
What if ...
shortly after starting a
program, the dishwasher
stops running and the
optic indicator flashes?
after a program has
ended, the optic
indicator and the
program indicators
flash?
there is a knocking
noise in the wash
cabinet?
there is a rattling noise? Items are not secure in
there is a knocking
noise in the water
pipes?
38
Possible fault
Water intake error.
The "Intake / Drain"
indicator flashes.
Drain error. Water remains
in the wash cabinet.
The "Intake / Drain"
indicator flashes.
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
the wash cabinet.
This may be caused by
the installation or the
diameter of the pipe.
Fix
– Turn off the dishwasher.
– Open the water valve.
– Clean the water inlet
filter, see maintenance
instructions.
– The water pressure is
less than 4.5 psi
(0.3 bar).
Contact a plumber.
– Turn off the dishwasher.
– Clean the triple filter.
See maintenance
instructions.
– Clean the drain pump
and the non-return
valve, see maintenance
instructions.
– Remove any kinks in
the drain hose.
– Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicator lights flash
again after the next
program cycle, call the
Miele Technical Service
Department.
Interrupt the program and
rearrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.