Table of Contents
Advertisement
Standby Settings
≥Press [OK] to show the following settings.
Power Save in Standby
[On]
It will go into the Power Save in Standby mode
when the unit is in standby mode.
[Off]
It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer]
"Power Save in Standby" is set to activate
during the setting time period. (
1 Press [3, 4] to select "On Timer" and press [OK].
Power Save in Standby
Power Save
On Timer
From
To 6 :00
0
:00
Number
Saves standby power consumption
0
9
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
CHANGE
is set to "Automatic".
SELECT
Press OK to manually set the period of
OK
Power Save.
RETURN
2 Press [3, 4] to set the start time (hour).
3 Press [2, 1] to select the stop time and press [3, 4] to
set the stop time (hour).
4 Press [OK] when you have finished the settings.
≥You can also use the numbered buttons for setting.
≥You can set start and stop time by the hour.
≥If the clock has not been set, "Power Save in Standby" is
activated at all hours.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[30 minutes]
[1 hour]
[6 hours]
[Off]
The unit will not automatically turn off.
Auto Standby after OTR
[On]
This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
One Touch Recording (
[Off]
Auto Standby after Copy
[On]
This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
copy (
51-59).
[Off]
RF OUT ( Aerial Signal )
[On]
Broadcast signals are output from this unit.
TV can receive broadcast signals even if this unit is in
standby mode when connecting TV with this unit using
the RF cable (
71).
[Off]
Press [2, 1] to select "Yes" when the confirmation
message is displayed.
Broadcast signals are not output from this unit to reduce
standby power consumption.
≥Power consumption is lowered additionally when
"Power Save in Standby" is activated.
≥If this unit turns into standby mode when connecting TV
with this unit using the RF cable, proper broadcast
images do not appear on TV.
below)
[2 hours]
[4 hours]
20).
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
§1§2
All the settings except for the ratings level, ratings PIN, language
settings, Slideshow Settings and clock settings, etc. return to the
factory preset.
[Yes]
[No]
Default Settings
§1§2
All the settings other than the tuning settings, clock settings,
country settings, language settings, disc language settings,
ratings level, ratings PIN, remote control code, etc. return to the
factory presets.
[Yes]
[No]
The timer recording programmes are also cancelled.
§1
Recordings on the HDD will not be deleted.
§2
35).
VQT3N81
69
Hide quick links:
Advertisement
Table of Contents
