Disc And Card Management - Panasonic Diga DMR-XS385 Operating Instructions Manual

Table of Contents

Advertisement

Disc and card management

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] [SD]
1
While stopped
Press [FUNCTION MENU].
2
Select "Others", then press [OK].
3
Select "DVD Management" or "Card
Management", then press [OK].
DVD Management
Files
Time Remaining
DVD-RAM
Disc Name
Disc Protection
Delete all titles
Format Disc
OK
RETURN
Providing a name for a disc
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
After performing steps 1–3 (
Select "Disc Name", then press [OK].
(
71, Entering text)
≥The disc name is displayed in the DVD Management
window.
≥[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] With a finalised disc, the
name is displayed on the Top Menu.
≥[+RW] The disc name is displayed only if you play the disc
on other equipment after creating Top Menu.
DVD Management
Files
1
Time Remaining
5:38 EP
DVD-RAM
≥ Do not perform this operation when copying HD Video (AVCHD format)
to DVD-R or DVD-R DL. (
Setting the protection
[RAM]
After performing steps 1–3 (
1 Select "Disc Protection", then press [OK].
2 Select "Yes", then press [OK].
e.g., when the disc is write-protected
Disc Name
Disc Protection
On
Delete all titles
To release the protection
Repeat steps 1 and 2.
≥The screen icon switched to "Off".
≥ When using a cartridge disc, you can also set the protection of cartridge
(
8, Cartridge-protection).
74
VQT2J59
1
Titles 11
5:38 EP
Used 0 : 22
Off
above)
01
02
Mouse
Cattle
51)
above)
Delete all titles
[RAM]
After performing steps 1–3 (
1 Select "Delete all titles", then press [OK].
2 Select "Yes", then press [OK].
3 Select "Start", then press [OK].
A message appears when finished.
4 Press [OK].
≥ Still picture data (JPEG) or computer data cannot be deleted.
Format
[RAM] [-RW‹V›] [+RW] [-RW‹VR›]
[+R] [+R]DL] (New disc only)
[SD]
Formatting deletes all contents (including computer
data), and they cannot be restored. Check carefully
before proceeding. The contents are deleted when you
format a disc or card even if you have set protection.
After performing steps 1–3 (
1 Select "Format Disc" or "Format Card",
then press [OK].
2 Select "Yes", then press [OK].
3 Select "Start", then press [OK].
4 Press [OK].
[RAM] To stop formatting
Press [RETURN
].
≥You can cancel formatting if it takes more than 2 minutes.
The disc must be reformatted if you do this.
≥ [RAM] Formatting normally takes a few minutes; however, it may take up
to a maximum of 70 minutes.
≥ Do not disconnect the AC mains lead while formatting. This can
render the disc or the card unusable.
≥ When a disc or card has been formatted using this unit, it may not be
possible to use it on any other equipment.
≥ [-RW‹V›] [-RW‹VR›] You can format DVD-RW only as DVD-Video format on
this unit.
left)
left)

Advertisement

Table of Contents
loading

Table of Contents