Panasonic Diga DMR-PWT420 Operating Instructions Manual page 82

Convenient functions
Changing the unit's settings (Setup)
RF OUT ( Aerial Signal )
Set whether to output the aerial signal or not
from RF OUT while in standby mode (When
"Power Save in Standby" is activated).
• If "On" is selected, the aerial signal is output
from this unit.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use "Set Code1", the factory set code, under
normal circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
• Operation is possible only with Panasonic
remote controls with "IR6" printed at the bottom
when the remote control code of this unit is set
to "Set Code 4", "Set Code 5" or "Set Code 6".
BLU-RAY DISC PLAYER/HDD RECORDER
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Time Zone
When the time is not correct, set "Time Zone".
(GMT - 6 to + 6)
• Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
82
VQT4E90
Owner ID
In order to prevent another person from using
this unit if it is stolen, you can set a PIN and input
your personal information (NAME, HOUSE NO,
POSTCODE).
Once the PIN has been set, you cannot return
to the factory preset. Make sure not to forget
this.
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
2 Enter the new 4-digit PIN with the number
3 Press [OK].
System Update
IR6
IR6
buttons.
buttons.
• Make a note of PIN in case you forget it.
e.g.,
PIN Entry
Remember the PIN.
0 0 0 0
OK
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to "Software (Firmware) Update".
( 84)
Software Update Now ( Internet )
Refer to "Software (Firmware) Update".
( 84)
Software Licence
Information about the software licence is
displayed.
84) are