Channel List; Auto Setup; Channel Sorting By Region; Manual Tuning - Panasonic Diga DMR-PWT420 Operating Instructions Manual

Channel List

You can edit the Channel List.
All DVB Channels
1
2
3
4
5
6
7
Select
Hide
RETURN
Tune Swap Reveal all
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Yellow: Reveal all channels.
• To change the channel number assignment
1 Select the channel, then press the green
button.
2 Enter the channel number to reassign with
the number buttons.
3 Press [OK].
• If another channel is already assigned to the
channel number, the two channels will be
switched.
• To set the channel manually
1 Press the red button.
2 Refer to "Manual Tuning". (

Auto Setup

You can restart the Auto Setup. (
PIN is required when you have locked channels.
(
Select "Yes", then press [OK].
• The timer recording programmes are cancelled.
• If you perform "Channel Sorting by Region" (
Page up
Page down
you can sort the channel list best suited to your region
after Auto tuning is finished.

Channel Sorting by Region

If you want to sort the channel list best suited to
your region, follow the on-screen instructions to
select the region you live in.
Normally, you should select "Best signal quality
(All Regions)".

Manual Tuning

You can add new channels manually.
1 Adjust the frequency.
2 Press [OK] to start scan.
right)

Update Channel List

You can update the channel list to the latest one.
• After performing "Update Channel List" or "Manual Tuning"
if the channel number has already been assigned,
channel number for them will be assigned from 800ch
onward.
74, Child Lock List)
• Adjust the frequency by checking the signal
strength and signal quality displays.
• The set channel is displayed in the table.
Convenient functions
19)
below),
73
VQT4E90