Basic Controls; Top Panel Controls And Remote Control - Panasonic TU-PT600E Operating Instructions Manual

Basic controls

Top panel controls and Remote control

Receiver ON / Stand-by
STR
Store
(see page 24)
Function selection
(see on this page below)
Programme Number Up ( ), Down ( )
Volume adjustment which uses these
buttons is performed after pressing
Function button.
When programme number up ( )/down
( ) buttons on the top panel of the main
part are pressed in stand-by mode, this
set turns on.
Function selection
Displays the on screen display functions, press repeatedly to select
from the available functions.
The following adjustments can be accessed directly.
Volume
Contrast
Brightness
Colour
Sharpness
Notes:
• Tint : Displayed when receiving NTSC signals.
• Tuning menu : Not displayed during AV mode.
12
F
TV AV
Volume Up (+), Down (-)/
TV/AVmode Selection
Press to select TV, AV input
signal modes sequentially.
Tuning menu
Balance
Treble
Bass
Tint
Picture Menu (see page 29, 30)
Sound Menu (see page 31, 32)
Setup Menu (see page 16, 17)
Press to display programme position, programme
name, channel number, time, MPX mode, Aspect
mode and programme table.
TV/TEXT Selection (see page 36, 37, 38)
TEXT Favourite Page Selection
On Screen Help button (see page 15)
Press to display an On Screen Help box,
press again to cancel.
Store (see page 18 - 28, 37)
Stores some settings in TUNING
menus and TELETEXT.
Normalization (see page 30, 32)
The N button will recall settings
stored with STR.
Status button
(see page 37)