Installation Procedure - Panasonic WV-CP150E Operating Instructions Manual

INSTALLATION PROCEDURE

Following explanation for installing the camera mount-
ing bracket is for the installation on the wall (A and B),
but also applies equally to the installation on the ceil-
ing, a shelf and stand.
1. Install the camera mounting bracket on the wall
with 2 screws.
Note: The coaxial cable can be passed through
the center hole of the camera mounting brack-
et.
Coaxial Cable
Fixing Screw
Camera Mounting
Bracket
-11-
2. Insert the camera fixing
screw into the camera
mounting hole and
tighten the screw firmly.
3. Connect the camera and monitor with the coaxial
cable and turn on the power switch of the monitor.
4. While viewing the monitor picture, loosen the
angular control screw slightly. Adjust the camera's
angle to the desired position, and then tighten the
screw firmly.
Angular Control Screw