Self-Timer Recording (Nv-Gs35 And Nv-Gs21 Only); Recording Images For Wide-Screen Tvs; Image Stabilizer Function - Panasonic NV-GS35EP Operating Instructions Manual

Self-timer recording (NV-GS35 and
NV-GS21 only)
You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Set [BASIC] >> [SELF TIMER] >> [YES].
2
Press the [PHOTO SHOT] button.
≥After the [
] indication flashes for approx.
10 seconds, recording will start. After
recording, the self-timer will be cancelled.
ª
To stop the timer midway through
Press the [MENU] button.
≥By operating the [OFF/ON] switch or mode dial,
the self-timer standby mode is cancelled.
≥If the continuous photoshot recording is set, the
maximum recordable pictures are recorded.
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >>[CINEMA] >> [ON].
ª
To cancel the Cinema function
Set [ADVANCE] >>[CINEMA] >> [OFF].
≥Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
≥This function does not widen the recording
range.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥When a cinema picture is imported into a
personal computer, the imported picture may
not be displayed correctly, depending on the
software in used.
24
LSQT0910
Record mode
PHOTO
SHOT
CINEMA

Image stabilizer function

Reduces the image shaking due to hand
movement when recording.
≥Set to Tape Recording Mode.
1
Set [ADVANCE] >> [SIS] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCE] >> [SIS] >> [OFF].
≥When a tripod is used, we recommend that you
turn the image stabilizer off.
≥Under fluorescent lighting, image brightness
may change or colours may not look natural.
≥When the night view function is used, the image
stabilizer function does not work. If so, the [[]
indication flashes.
≥In the following cases, the image stabilizer
function may not work effectively.
≥When the digital zoom is used
≥When a conversion lens is used
≥When recording is done in an extremely dark
place
≥When the camera is shaken greatly
≥When you record a moving subject while
tracking it