Notes On Operating The Network Menu; Soft Keyboard Operations - Epson EB-925 User Manual

List of Functions
Submenu
Network Config‐ The following menus are available for setting Network
uration items.
Basic, Wireless LAN, Security, Wired LAN, Mail, Others,
Reset, and Complete
* Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
Epson Projector Contact List
s
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as security settings.
s "Changing Settings Using a Web Browser (Web Control)"

Notes on operating the Network menu

Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select Yes, No,
or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
Function
p.63
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.

Soft keyboard operations

The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [ ], [ ], [ ], and [
the [ ], [ ], [ ], and [
cursor to the desired key, and then press the [Enter] button to enter the
alphanumeric character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
• Each time the CAPS key is selected and the [Enter] button is pressed, it
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [Enter] button is pressed,
it sets and changes the symbol keys for the section enclosed by the
frame.
] buttons on the remote control or
] buttons on the control panel to move the
84