Base Unit Settings - Panasonic KX-TCD650 Operating Instructions & Quick Manual

Key Lock
You can lock the handset dialling
buttons. Only incoming calls are
accepted while the key lock is ON.
Turn Key Lock ON
Z and hold Y Y until a beep sounds.
Z
'Ó' is displayed and all dialling
buttons are locked.
! When the key lock is ON,
emergency calls cannot be made
until key lock is cancelled.
Turn Key Lock OFF
Z and hold Y Y until a beep sounds.
Z
'Ó' disappears and key lock is
cancelled.
The key lock is also cancelled if the
handset is turned off.
Recall Feature
is used to access special
M
telephone services. Contact your
Network provider for details.
If your unit is connected to a PBX,
pressing M allows you to access
some features of your host PBX such
as transferring an extension call
(Refer to 'TBR' in 'Base Unit Settings').
Call Waiting
Call Waiting is a service of your
Network provider and will only
operate if you have subscribed to this
service.
After subscription, your handset
displays a second caller's phone
number while talking and a Call
Waiting tone is heard.
You can answer the second call,
keeping the first call on hold.
Please consult your
Network provider for
details of this service.
Helpline Tel.No. : U.K. 08700 100 076
Dialling Pause
! This function is for PBX
line/long distance service users.
A dialling pause is used when a
pause in the dialling of the phone
number is necessary using a PBX or
accessing a long distance service.
(see "Select Pause Timing").
For example, when 9 (line access
number) is dialled followed by a
pause to access an outside line
through a PBX:
I .
Z I Z
X . ('p' is displayed on the
Z X Z
LCD).
Enter telephone number.
‰ .
Z ‰ Z
Entering a pause prevents
misdialling when you redial or dial a
stored number.
Pressing X once creates one
pause. To extend the pause
requirement time, ZX
accordingly.
R.O.I. 01289 8333 9