The Grip Belt; Re-Attaching The Lens Cap; Attaching The Shoulder Strap - Panasonic NV-GS 8 EB Operating Instructions Manual

The Grip Belt

ª To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of
your hand.
1
Detach the end of the Grip Belt.
2
Adjust the length of the Grip Belt to the size
of your hand.
3
Reattach the Grip Belt.

Re-attaching the Lens Cap

To protect the Lens surface, attach the Lens Cap.
1
The Lens Cap and Lens Cap Cord comes
preattached to the Grip Belt.
2
Pass the end of the Lens Cap Cord through
the attached eye on the Lens Cap. Then
pass the Lens Cap through the loop made
by itself and pull tight.
≥When not using the Lens Cap, pull the Lens
Cap Cord in the direction of the arrow. 1
Before Use
≥When you are not recording, be sure to cover
the Lens with the Lens Cap for protection. 2
1
≥When you remove the Lens Cap, press the
knobs firmly.

Attaching the Shoulder Strap

We recommend that you attach the Shoulder
Strap before going out of doors to record so as to
avoid dropping the Movie Camera.
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder on the Movie
Camera.
2
Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
≥Pull it out more than 2 cm 1 from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
≥Attach the other end of the Shoulder Strap to
the other Shoulder Strap Holder in the same
way.
-12-
1
2