Power Supply - Panasonic RX-CS40 Operating Instructions Manual

Power supply

AC power supply cord
A
To household
AC outlet
AC power supply cord
A
Set the voltage.
Use a flat-head screw-driver to turn the voltage selector for the
area in which the unit will be used.
Connect the AC power supply cord (included).
Cautions
• Do not touch it with wet hands.
• Do not place heavy objects on it.
• Poor connection and cord damage can cause fire or electric shock.
• Grasp the plug firmly when unplugging the cord. Pulling the AC
power supply cord can cause electric shock.
• Disconnect the AC power supply cord from the household AC outlet
if the unit is not going to be used for a long time.
Batteries
B
Disconnect the AC power supply cord.
Replace the batteries when "OPERATION/BATT" goes dim during
play.
To prevent damage to the batteries and electrolyte leakage, heed the
following points.
• Do not use rechargeable type batteries.
• Align the and polarities properly when inserting the batteries.
• Do not mix different types or makes of batteries or old and new
batteries.
• Remove batteries if you do not plan to use the unit for a long time.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Removal
Insert your finger into the slot (
out the batteries.
Car battery cord
C
Insert the plug into the DC Input Jack.
Plug the other end into the cigarette lighter socket in your car.
Batteries
B
) at the bottom of the unit and push
Car battery cord
C
5
RQT7635