Panasonic NV-FJ762EE Operating Instructions Manual page 53

4 Press the OK button
5 Press the EXIT button
To Set the Remote Control Mode
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons
(3421) to select
"Functions", "Remote" and
"VCR 1/VCR 2" in this order.
3 Press the Cursor buttons (LM)
remote control mode.
VCR 1: Select this setting on both the VCR and the
remote control for normal use with one VCR.
VCR 2: Select this setting on both the VCR and the
remote control when using this VCR and another
Panasonic VCR in the same place.
This ensures that you can operate both VCRs
independently with their respective remote
control.
It also allows you to operate both VCRs with a
single remote control, simply by changing the
remote control mode on the remote control.
4 Press the OK button
5 Press the OK button
6 To change the remote control mode on the remote
control itself, change the position of the VCR 1/2 switch
to match the setting made in step 3 above. If these
settings are not matched, the remote control cannot be
used to operate the VCR.
7 Press the EXIT button
To Set for One-Touch Editing or Other
Editing Modes
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons
(3421) to select
"Functions", "Edit" and the
presently selected Edit mode
("ON" or "OFF") in this order.
3 Press the Cursor buttons (34)
Edit mode.
ON: For One-Touch Editing (Only when this VCR is
used as recording unit.)
OFF: For editing with an editing controller or for
synchronized editing
4 Press the OK button
5 Press the EXIT button
to conclude the setting.
to exit the On Screen Display.
to display the Main menu on
Main menu
Timer record
AV2: DECODER
Tape Library
TV system: AUTO
Display
RFC system: DK
Tuning
Picture: AUTO
Clock
Remote: VCR 1
Functions
Edit: OFF
Language
Audio mode: NORMAL
Country
SQPB: AUTO
Satellite
to select the desired
.
again.
to exit the On Screen Display.
to display the Main menu on
Main menu
Timer record
AV2: DECODER
Tape Library
TV system: AUTO
Display
RFC system: DK
Tuning
Picture: AUTO
Clock
Remote: VCR 1
Functions
Edit: OFF
Language
Audio mode: NORMAL
Country
SQPB: AUTO
Satellite
to select the desired
to conclude the setting.
to exit the On Screen Display.
To Set the Audio Mode to Be Used During
Playback
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons
(3421) to select
"Functions", "Audio mode" and
"NORMAL/MIX" in this order.
3 Press the Cursor buttons (34)
audio mode to be used during playback.
NORMAL: Normally set to this position.
MIX: Use this setting when playing back a
cassette tape on which audio dubbing has
been performed. The Hi-Fi sound track with
the original sound and the normal sound
track (mono) with the audio-dubbed sound
and sound using AV insert function are
played back together.
4 Press the OK button
5 Press the EXIT button
To Play back Tapes Recorded in the S-VHS
Format
(SQPBuS-VHS Quasi Playback)
1 Press the MENU button
the TV screen.
2 Press the Cursor buttons
(3421) to select
"Functions", "SQPB" and
"AUTO/ON/OFF" in this order.
3 Press the Cursor buttons (34)
"ON" or "OFF".
Normally set to "AUTO".
VCR automatically detects the format in which the
recording was made and selects the same format for
playback. However, picture distortion may appear.
Therefore, set to "ON" or "OFF".
ON: Use this setting when playing back a
cassette tape recorded in the S-VHS format.
≥Noisy playback pictures may appear
depending on the type of tape used.
≥It is not possible to fully obtain the high
resolution that S-VHS is capable of.
≥It is not possible to record in the S-VHS
format with this VCR.
OFF: Use this setting when playing back a
cassette tape recorded in the VHS format only.
4 Press the OK button
5 Press the EXIT button
to display the Main menu on
Main menu
Timer record
AV2: DECODER
Tape Library
TV system: AUTO
Display
RFC system: DK
Tuning
Picture: AUTO
Clock
Remote: VCR 1
Functions
Edit: OFF
Language
Audio mode: NORMAL
Country
SQPB: AUTO
Satellite
to select the type of
to conclude the setting.
to exit the On Screen Display.
to display the Main menu on
Main menu
Timer record
AV2: DECODER
Tape Library
TV system: AUTO
Display
RFC system: DK
Tuning
Picture: AUTO
Clock
Remote: VCR 1
Functions
Edit: OFF
Language
Audio mode: NORMAL
Country
SQPB: AUTO
Satellite
to select "AUTO",
to conclude the setting.
to exit the On Screen Display.
53