Panasonic NV-FJ762EE Operating Instructions Manual page 41

To Prepare the VCR for Remote-controlled
Operation of the Satellite Receiver
(Setting the Tuner Type)
This VCR lets you change the programme position on the
satellite receiver and programme timer recordings of satellite
programmes—all with this VCR's remote control. This is
called "satellite control".
To enable the VCR to control the satellite receiver, you need
to set the tuner type of your satellite receiver. You can find the
tuner type numbers on the enclosed list of compatible satellite
receivers. However, if your satellite receiver is not included in
this list, it cannot be remote-controlled via this VCR.
Preparation
≥ Set the VCR/TV switch
Operations
1 Press the MENU button
on the TV screen.
2 Press the Cursor buttons (3421)
"Satellite", "Connection" and "NO" in this order.
3 Press the Cursor buttons (34)
to select the type of connection
according to the type of socket
on the VCR to which the
satellite receiver is connected.
NO: When the satellite receiver is not
connected to the VCR
RF: When the satellite receiver is connected
to the VCR's Aerial Input socket
AV1:When the satellite receiver is connected
to the VCR's AV1 21-pin Scart socket
AV2:When the satellite receiver is connected
to the VCR's AV2 21-pin Scart socket
4 Press the OK button
5 Press the Cursor buttons (3421)
type" and "1" in this order.
6 Find your receiver in the
enclosed list of compatible
satellite receivers and enter its
tuner type number by pressing
the Numeric buttons
7 Press the OK button
8 Press the EXIT button
to "VCR".
to display the Main menu
Main menu
Timer record
Tape Library
Connection:
Display
Position:
Tuning
Clock
Tuner type:
Functions
Language
Country
Satellite
to select
Main menu
Timer record
Tape Library
Connection: AV2
Display
Position:
Tuning
Clock
Tuner type:
Functions
Language
Country
Satellite
.
to select "Tuner
Main menu
Timer record
Tape Library
Connection: AV2
Display
Position:
Tuning
Clock
Tuner type:
Functions
Language
.
Country
Satellite
to conclude the setting.
to exit the On Screen Display.
Hint:
¡ If you select "RF" in step 3, "Satellite–Position" is set
automatically and it is not possible to change the satellite
programme position here. If you want to change it, refer to
page 43.
Note:
¡ If your satellite receiver is not included in the list of
compatible satellite receivers, this VCR cannot control it.
NO
p p
1
p p
1
p p
1
41