Caller Id; Caller Id Service - Panasonic KX-FLB851E Operating Instructions Manual

All in one flatbed laser fax with multi-action sorter
Table of Contents

Advertisement

4. Caller ID

Caller ID
4 Caller ID

4.1 Caller ID service

This unit is compatible with the Caller ID
service offered by your local telephone
company. To use this unit's Caller ID
features, you must subscribe to Caller ID
service.
Important:
L This unit is designed in accordance with
the "FSK based subscriber line protocol"
under the ETS (European
Telecommunication Standard) and only
supports the basic CLIP (Calling Line
Identification Presentation) features.
L This unit will only display the caller's
telephone number and name.
L This unit will not support future additional
telephone services.
L This unit cannot support services based
on the "DTMF based subscriber line
protocol".
L Depending on the service of the local
telephone company, the date/time of the
call or the caller's name may not be
displayed.
Make sure the following ring setting is set to
2 or more rings beforehand.
– FAX ring setting (feature #210 on page 63)
– TEL/FAX ring setting (feature #212 on page
65)
4.1.1 How Caller ID is displayed
The calling party's name or telephone number
will be displayed after the 1st ring. You then have
the option of whether or not to answer the call.
The unit will automatically store caller
information (name, telephone number and the
time of the call) of the 30 most recent calls. Caller
information is stored by the most recent to the
oldest call. When the 31st call is received, the
oldest call is deleted.
Caller information can be viewed on the display
one item at a time (page 43) or confirmed by
printing the Caller ID list (page 93).
L When caller information is received and it
matches a telephone number stored in the
fax machine's one-touch dial or navigator
directory, the stored name will be displayed.
L If the unit is connected to a PBX (Private
Branch Exchange) system, caller information
may not be received properly. Consult your
PBX supplier.
L If the unit cannot receive caller information,
the following will be displayed:
42
– "OUT OF AREA": The caller dialled from
an area which does not provide Caller ID
service.
– "PRIVATE CALLER" or "WITHHELD":
The caller requested not to send caller
information.
– "LONG DISTANCE": The caller made a
long distance call.
To confirm caller information by printing
the Caller ID list
– To print manually, see page 93.
– To print automatically after every 30 new
calls, activate feature #216 (page 63).

Advertisement

Table of Contents
loading

Table of Contents