8. Help
Display
"REMOVE DOCUMENT"
"REPLACE DRUM"
"CHANGE SUPPLIES"
"RX MEMORY FULL"
"TONER EMPTY"
"CHANGE SUPPLIES"
"TONER LOW"
"CHANGE SUPPLIES"
"TOP COVER OPEN"
"TRANSMIT ERROR"
"WARMING UP"
"WRONG PAPER"
74
Cause & Solution
L The document is jammed. Remove the jammed document (page
87).
L Attempted to send a document longer than 600 mm. Press
{STOP} to remove the document. Divide the document into two or
more sheets and try again.
L The drum life is complete. Replace the drum unit immediately
(page 81).
L The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 18)
or clear the jammed paper (page 84).
L If you select the computer that will be used for receiving a fax in
feature #443 (page 70), and feature #442 is set to "ALWAYS" (page
68), check the connection between the computer and the unit.
L The toner life is complete. Replace the toner cartridge immediately
(page 81).
L The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 81).
L The top cover is open. Close it.
L A transmission error occurred. Try again.
L The inside of the unit is cold. Let the unit warm up. Wait for a while.
L The unit is warming up before operation starts. Wait for a while.
L The fax message was printed on paper which is shorter than A4
size paper. Use the appropriate size paper (page 95).