Table of Contents
Advertisement
9. Help
Display
"LOW TEMP."
"MAINTENANCE
REQUIRED"
"PRINT INFO
PRESS START"
"MEMORY FULL"
"MODEM ERROR"
"NO FAX REPLY"
"OUT OF PAPER
INPUT TRAY #1"
"OUT TRAY #1 FULL"
"PAPER JAMMED"
"OPEN LOWER LEFT
SIDE TRAY COVER"
"PAPER JAMMED"
"OPEN TOP COVER"
"PC FAIL OR BUSY"
"PLEASE WAIT"
"POLLING ERROR"
"REDIAL TIME OUT"
74
Cause & Solution
L The inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
L Your unit requires a scheduled maintenance. Maintenance is
highly recommended for optimal performance of your unit. Please
contact our service personnel.
L When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
L When making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
L There is something wrong with the unit's modem. Contact our
service personnel.
L The other party's fax machine is busy or has run out of recording
paper. Try again.
L Recording paper is not installed or the input tray has run out of
paper. Install paper (page 18).
L Recording paper is not fed into the unit properly. Reinstall paper
(page 18).
Note:
L "#1": Paper input tray
L "#2": Multi-purpose input tray
L "#3": Optional input tray
L "#1+#3": Paper input tray and optional input tray
L Paper has been fully stacked on the output tray. Remove the
stacked paper.
Note:
L "#1": Upper output tray
L "#2": Middle output tray
L "#3": Lower output tray
L A recording paper jam occurred inside of the optional input tray.
Clear the jammed paper (page 88).
L A recording paper jam occurred inside of the unit. Clear the
jammed paper (page 85).
L The cable or the computer power cord is not connected correctly.
Check the connections (page 50).
L The software is not running on the computer. Restart the software
and try again.
L The unit is warming up. Wait for a while.
L The other party's fax machine does not offer the polling function.
Check with the other party.
L The other party's fax machine is busy or has run out of recording
paper. Try again.
Advertisement
Table of Contents
