Table of Contents
Advertisement
8. Programmable Features
{#}{4}{6}{3} Setting the default operation
mode
DEFAULT MODE
=COPY
[V^]
To select the default operation mode when the
selected time of the mode timer (feature #464)
passes.
{1} "COPY" (default): Copy mode is selected as
default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this
feature.
{#}{4}{6}{4} Setting the default operation
mode timer
MODE TIMER
=1min
[V^]
To set the timer before returning to the default
operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
{#}{4}{8}{2} Setting toner save feature
TONER SAVE
=OFF
[V^]
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by
reducing toner consumption.
66
8.4 Fax features
{#}{2}{1}{2} Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2
[V^]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call.
{2} "2" (default)
{3} "3"
{4} "4"
Note:
L See page 40 for details.
{#}{4}{0}{1} Printing a sending report
SENDING REPORT
=ERROR
[V^]
To print a sending report for fax transmission
results (page 33).
{0} "OFF": Sending reports will not be printed.
{1} "ON": A sending report will be printed after
every transmission.
{2} "ERROR" (default): A sending report will be
printed only when fax transmission fails.
{#}{4}{0}{2} Setting the journal report to
print automatically
AUTO JOURNAL
=ON
[V^]
{0} "OFF": The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{1} "ON" (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 33).
{#}{4}{0}{4} Changing the receiving mode
in the manual answer setting
MANUAL ANSWER
=TEL
[V^]
{1} "TEL" (default): Telephone mode (page 39)
{2} "TEL/FAX": Telephone/Fax mode (page 40)
{#}{4}{1}{1} Sending documents overseas
OVERSEAS MODE
=ERROR
[V^]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
Advertisement
Table of Contents
