Control Panel View/Buttons; Operating Instructions; General Instructions - Hanns.G HG281 User Manual

User's Manual

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located
on the right side of the monitor (See Figure 5). By changing these settings, the picture can
be adjusted to your personal preferences.
The power cord should be connected.
•
Connect the Signal cable from the monitor to the VGA card.
•
Press the power button to turn on the monitor. The power indicator will light up.
•
CONTROL PANEL BUTTONS:
1. Menu / Enter
3. Volume +
5. Power Button
Figure.5. Control Panel Buttons
2.
4.
6.
12
Auto Adjustment
Volume –
Power Indicator