Front Panel Control - Hanns.G iU191 User Manual

FRONT PANEL CONTROL

Power Button:
•
Press this button to switch ON/OFF of monitor's power.
Power Indicator:
•
Green — Power On mode.
Orange — Power Saving mode.
MENU / ENTER:
•
Activates the OSD menu or confirms adjustments to settings.
Adjust < >:
•
1. Activates the Contrast or Brightness control when the OSD is OFF.
2. Navigate through adjustment icons when OSD is ON or adjust a function when
function is activated.
Auto Adjust button: (for D-sub only)
•
When OSD menu is in off status, press and hold this button for more than two seconds to
activate the Auto Adjustment function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and
Phase.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts,
•
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or
shock.
Save the original shipping box and packing materials, as they will come in handy if you
•
ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the
•
factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains
•
may be removed with a cloth lightly dampened with a mild detergent solution. Never use
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage
the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
Function Key Lock:
•
Press the <「Contrast」, >「Brightness」 and the 「Menu」 buttons simultaneously to
enable the Function Key Lock. When the Function Key Lock is enabled, only the Power
button is active. Press the <「Contrast」, >「Brightness」 and the 「Menu」buttons
simultaneously again to unlock the function keys.
11
User's Manual