Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hanns.G HG221A
Summary of Contents for Hanns.G HG221A
- Page 1 HG221A HSG1061...
- Page 2 User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 Some of the features of the TCO’03 Display requirements: Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the • user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time –...
-
Page 4: Recycling Information
User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. -
Page 5: Table Of Contents
SAFETY NOTICE ...6 PRECAUTIONS...6 SPECIAL NOTES ON LCD MONITORS ...7 BEFORE YOU OPERATE THE MONITOR ...8 FEATURES...8 CHECKING THE CONTENTS OF THE PACKAGE ...8 INSTALLATION INSTRUCTIONS ...9 POWER...9 MAKING CONNECTIONS...10 ADJUSTING THE VIEWING ANGLE... 11 OPERATING INSTRUCTIONS ...12 GENERAL INSTRUCTIONS...12 FRONT PANEL CONTROL ...13 HOW TO ADJUST A SETTINGS ...14 PLUG AND PLAY...17... -
Page 6: Safety Notice
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. -
Page 7: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the • Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. -
Page 8: Before You Operate The Monitor
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 22” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 1680X 1050@60Hz • ® EPA ENERGY STAR • Ergonomic Design • Space Saving, Compact Case Design •... -
Page 9: Installation Instructions
INSTALLATION INSTRUCTIONS INSTALL INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. -
Page 10: Making Connections
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 2. -
Page 11: Adjusting The Viewing Angle
ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the • monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. •... -
Page 12: Operating Instructions
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. -
Page 13: Front Panel Control
FRONT PANEL CONTROL Power Button: • Press this button to switch ON/OFF of monitor’s power. Power Indicator: • Green — Power On mode. Orange — Power Saving mode. MENU / ENTER: • 1. Turn the OSD menu on/off or return to the previous menu. 2. -
Page 14: How To Adjust A Settings
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/CONTRAST BRIGHTNESS CONTRAST X-CONTRAST INPUT SETTING INPUT SETTING AUTO SEARCH COLOR SETTING WARM NATURE COOL USER IMAGE SETTING AUTO ADJUST ASPECT RATIO H-POSITION Adjust the brightness value of the display according to your preference. - Page 15 V-POSITION CLOCK PHASE SHARPNESS HDMI MODE RESPONSE TIME OSD SETTING LANGUAGE H-POSITION V-POSITION TRANSPARENCY OSD TIME-OUT OSD COLOR only] Select the 「V-POSITION」 option to shift the screen image up or down. Enter the option and adjust the level. Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen.
- Page 16 User’s Manual SYSTEM AUDIO INPUT VOLUME MUTE DDC/CI FACTORY RESET INFORMATION While transferring via the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is recommended to select AUDIO INPUT as PC, and make sure the PC audio output cable is connected to monitor’s LINE IN (or AUDIO IN) port.
-
Page 17: Plug And Play
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 18: Technical Support (Faq)
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION Power LED is not on No Plug & Play The display is too dark or too bright. Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture. -
Page 19: Error Message & Possible Solutions
ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose; tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table. - Page 20 User’s Manual 1600x1200@60Hz 1680x1050@60Hz 65.29 59.954...
-
Page 21: Appendix
APPENDIX SPECIFICATIONS LCD Panel Video Display Colors Max. Resolution Plug & Play ® EPA ENERGY STAR Audio output Input Terminal Maximum Screen Size Power Source Environmental Considerations Dimensions Weight (NW) *** The above specification is subject to actual product specification and is subject to change without prior notice.