Using The Gps Log; Recording The Gps Log - Panasonic Lumix DMC-TZ37 Operating Instructions Manual

GPS and map functions

Using the GPS log

Location information positioned using GPS can be recorded as a "GPS log". When the
GPS log is used, 1 day of travelling can be displayed with this unit's map. An output of the
GPS log file can also be utilised on compatible websites, etc.

Recording the GPS log

You can set the GPS log's recording interval or recording duration.
• GPS logs cannot be recorded to the built-in memory. Use a card.
Select [GPS Log] from GPS menu and press [MENU/SET]
Use cursor button to select [Log Record] and press
[MENU/SET]
■
For the first time only (If [Auto Clock Set] and [World Time] are not set)
When [Please set the home area] is displayed, press [MENU/SET]
Press
Adjust settings
[Recording
interval]
[Recording
duration]
Use cursor button to select [Start] and press [MENU/SET]
"LOG" is displayed in the icon during positioning while recording logs.
■
Ending logging
Select [End] in step
●
In the following cases, GPS logging automatically ends.
• When [GPS Setting] is set to [OFF]
• When remaining battery becomes
●
The recorded GPS log is saved in the NMEA format.
• You can convert to and output in the KML format.
DMC-TZ40 DMC-TZ41
to set your home area and press [MENU/SET]
The GPS log is recorded at the set interval.
■
Settings
[60SEC.] / [30SEC.] / [15 SEC.]: Records a log at the set interval.
• Depending on the signal reception situation, the log recording intervals
may be longer.
When the set time elapses, the GPS log automatically stops recording.
■
Settings
[ENDLESS]: Does not set a time to stop logging.
[48HRS] / [24HRS] / [12HRS] / [6HRS]:
When the set time elapses, the log stops recording.
and press [MENU/SET]
- 187 -
(→189)
VQT4T12