Application (Record)
• For the setting procedures of the menu.
[Quality]
Set quality of picture.
■
Settings:
([Fine]) High quality, priority to picture quality
([Standard]) Standard quality, priority to the number of pictures
●
The setting is fixed to
●
When [3D Photo Mode] Scene Mode is selected, the displayed icons are different:
([3D+Fine]): An MPO picture and a high quality JPEG picture are recorded
simultaneously.
([3D+Standard]): An MPO picture and a standard quality JPEG picture are
[Sensitivity]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Settings: [AUTO] /
Setting guide
[Sensitivity]
Location
(recommended)
Shutter speed
Interference
Subject blur
●
[AUTO] is automatically set in a range up to 1600 based on subject brightness.
●
is automatically set in a range up to 1600 based on subject movement and
brightness.
●
The [Sensitivity] is automatically set in the following cases:
• When recording motion pictures
• When [Burst] is set to
●
The shutter speed is restricted as follows based on the [Sensitivity] setting.
[Sensitivity]
AUTO /
100 / 200 / 400
800 / 1600
*
3200 / H.6400
●
Cannot select
●
Cannot select [AUTO] or
*
Only when [Extended ISO] is [ON].
, in [High Sens.] Scene Mode.
recorded simultaneously.
/ [100] / [200] / [400] / [800] / [1600] / [3200] / [H.6400] *
[100]
Bright
(outdoors)
Slow
Low
High
Automatically changes depending on the [Sensitivity] setting.
4 - 1/2000th
1 - 1/2000th
1/4 - 1/2000th
in [Shutter-Priority] Mode.
in [Manual Exposure] Mode.
- 116 -
(→54)
[H.6400]
Dark
Fast
High
Low
Shutter speed
Using the [Rec] menu
*
VQT4T12