Removing The Separation Roller Rubber - Konica Minolta BIZHUB PRO C6500 Replacement Instructions Manual

bizhub PRO C6500/bizhub PRO C6500e

Removing the separation roller rubber

Periodically replaced parts/cycle:
- Separation roller rubber: Every 400,000 prints (actual replacement cycle:
every 125,000 feed)
Note
The tray 1 was used to illustrate the replacement procedure below. The
procedure is the same for the tray 2 and tray 3.
1
Turn OFF the sub power switch.
2
Open the left front door, and then turn OFF the main power switch.
3
Unplug the power cord.
bizhub PRO C6500 / bizhub PRO C6500e
left front door main power switch sub power switch
2
2-15